Bekalan kuasa PSU 37758 untuk pencetak Domino A100 / A200 / A300 A Series CIJ
- No. Bahagian
- 37758
- Jenis
- HTK-110C
- Keadaan
- Baharu serasi OEM
- Kuantiti min.
- 1 pc
- Masa kirim
- 7-15 working days
- Harga
- US$79
- Jaminan
- 12 months
Butiran Produk Bekalan kuasa / PSU 37758 digunakan untuk pencetak inkjet CIJ Domino A100, A200, A300 dan siri A. Direka untuk bahagian sistem kuasa elektrik pencetak dan sesuai untuk penggantian bekalan kuasa, penyelenggaraan PSU serta pembaikan agihan kuasa pencetak. Pelanggan perlu mengesahkan sama ada model pencetak sedia ada dan konfigurasi bekalan kuasa serasi sebelum membuat pesanan. Sokongan Perkhidmatan Kami bukan sahaja membekalkan alat ganti pencetak yang boleh dipercayai, malah menawarkan sokongan teknikal untuk semakan model, panduan pemasangan dan penyelesaian masalah. Pasukan kami boleh membantu pelanggan mengesahkan keserasian dan memilih alat ganti yang sesuai mengikut model pencetak serta keperluan penyelenggaraan. Nota Pembelian Sila sahkan model pencetak (A100 / A200 / A300 / siri A), nombor alat ganti (37758), versi bekalan kuasa / PSU, voltan terkadar, spesifikasi output dan keserasian penyambung sebelum membuat pesanan.
Maklumat Perdagangan
- Masa Penghantaran7-15 working days
- Waranti12 months
- Terma PerdaganganFOB Guangzhou (Incoterms 2020) · FCA · EXW Meizhou available
- Syarat PembayaranT/T 30% deposit, 70% before shipment
- PenghantaranDoor-to-door express (DHL/UPS) available for sample orders
- Keupayaan Bekalan200 sets per month
Spesifikasi Teknikal
| No. Alat Ganti | 37758 |
|---|---|
| Sesuai untuk | Domino A100 / A200 / A300 / A Series |
| Model serasi | HTK-110C |
| Input AC | 100-240 V, 2.0 A Max, 50-60 Hz |
| Output DC | +5 V / +12 V / -12 V, Max 122 W |
| Aplikasi | Sistem kuasa elektrik pencetak |
Soalan Lazim
Adakah ini bahagian asli atau pengganti serasi?
Berapa masa kirim dan bagaimana penghantaran?
Adakah anda juga membekalkan dakwat, pelarut dan penapis bersama alat ganti?
Technical Guide
What is the Bekalan kuasa PSU 37758 untuk pencetak Domino A100 / A200 / A300 A Series CIJ
This Bekalan kuasa PSU 37758 untuk pencetak Domino A100 / A200 / A300 A Series CIJ (Part No. 37758) is an electronic or sensing module in Domino A Series CIJ printers, providing power, control signals or status detection.
Key Functions
- Supplies regulated power to the control board
- Processes control and drive signals for the head
- Detects system status (ink, viscosity, position)
- Protects circuits against voltage and signal faults
Common Failure Symptoms
- Unexpected 'Viscosity' / 'Ink Viscosity' or print-quality alarms
- Faint, broken or drifting printed characters
- Recurring nozzle or charge-electrode blockages
- Higher solvent or ink consumption than normal
- Sudden print stop caused by system errors
Replacement & Installation Steps
- Power down the printer and disconnect it from mains
- Relieve pressure and drain the related ink line
- Remove the worn part and inspect for debris or damage
- Install the new part with correct orientation and torque
- Reconnect, prime / bleed the circuit and run a test print
Troubleshooting Guide
- Check ink and solvent reservoirs are filled to range
- Inspect for leaks along ink and solvent paths
- Clean the part with the recommended solvent if accessible
- Confirm electrical connectors and tubing are seated
- Replace the part if the error persists after calibration
Benefits of Original-Spec Parts
- Stable print quality under all operating conditions
- Lower ink and solvent waste through correct specification
- Longer printhead life by avoiding contamination
- Fewer unplanned production-line stoppages
- Full compatibility with the original machine standard
Ordering & Compatibility
A genuine-spec Bekalan kuasa PSU 37758 untuk pencetak Domino A100 / A200 / A300 A Series CIJ (Part No. 37758) is built for Domino A Series CIJ printers. Always match the exact part number to your machine model. As a factory-direct manufacturer with 20+ years in CIJ inkjet coding, we supply original-spec compatible parts with strict QC and worldwide shipping. Send us your part number and quantity for a written quotation within 2 working hours.
