Ink System PCB
- No. Bahagian
- 25115
- Sesuai untuk
- Domino A Series CIJ Printers
- Keadaan
- Baharu serasi OEM
- Kuantiti min.
- 1 pc
- Masa kirim
- 7-15 working days
- Harga
- Sebut harga dalam 2 jam bekerja
- Jaminan
- 12 months
Butiran Produk 25115 Ink System PCB digunakan untuk pencetak pengekodan continuous inkjet (CIJ) Domino. Direka untuk bahagian kawalan elektronik dan sesuai untuk penggantian komponen elektronik, penyelenggaraan bahagian kawalan elektronik serta kerja pembaikan berkaitan. Produk ini dibekalkan sebagai alat ganti yang serasi. Pelanggan perlu mengesahkan sama ada model pencetak sedia ada dan konfigurasi komponen elektronik serasi sebelum membuat pesanan. Sokongan Perkhidmatan Kami bukan sahaja membekalkan alat ganti pencetak yang boleh dipercayai, malah menawarkan sokongan teknikal untuk semakan model, panduan pemasangan dan penyelesaian masalah. Pasukan kami boleh membantu pelanggan mengesahkan keserasian dan memilih alat ganti yang sesuai mengikut model pencetak serta keperluan penyelenggaraan. Nota Pembelian Sila sahkan model pencetak, nombor alat ganti (25115), versi komponen elektronik dan keserasian pencetak sebelum membuat pesanan.
Harga berbeza mengikut konfigurasi dan kuantiti
Maklumat Perdagangan
- Masa Penghantaran7-15 working days
- Waranti12 months
- Terma PerdaganganFOB Guangzhou (Incoterms 2020) · FCA · EXW Meizhou available
- Syarat PembayaranT/T 30% deposit, 70% before shipment
- PenghantaranDoor-to-door express (DHL/UPS) available for sample orders
- Keupayaan Bekalan200 sets per month
Spesifikasi Teknikal
| Part No | 25115 |
|---|---|
| Suitable For | Domino A Series CIJ Printers |
Soalan Lazim
Model pencetak apa yang sesuai untuk 25115?
Berapakah harga 25115 dan berapa cepat sebut harga?
Adakah ini bahagian asli atau pengganti serasi?
Berapa masa kirim dan bagaimana penghantaran?
Adakah anda juga membekalkan dakwat, pelarut dan penapis bersama alat ganti?
Technical Guide
What is the Ink System PCB
This Ink System PCB (Part No. 25115) is an electronic or sensing module in Domino A Series CIJ Printers, providing power, control signals or status detection.
Key Functions
- Supplies regulated power to the control board
- Processes control and drive signals for the head
- Detects system status (ink, viscosity, position)
- Protects circuits against voltage and signal faults
Common Failure Symptoms
- Unexpected 'Viscosity' / 'Ink Viscosity' or print-quality alarms
- Faint, broken or drifting printed characters
- Recurring nozzle or charge-electrode blockages
- Higher solvent or ink consumption than normal
- Sudden print stop caused by system errors
Replacement & Installation Steps
- Power down the printer and disconnect it from mains
- Relieve pressure and drain the related ink line
- Remove the worn part and inspect for debris or damage
- Install the new part with correct orientation and torque
- Reconnect, prime / bleed the circuit and run a test print
Troubleshooting Guide
- Check ink and solvent reservoirs are filled to range
- Inspect for leaks along ink and solvent paths
- Clean the part with the recommended solvent if accessible
- Confirm electrical connectors and tubing are seated
- Replace the part if the error persists after calibration
Benefits of Original-Spec Parts
- Stable print quality under all operating conditions
- Lower ink and solvent waste through correct specification
- Longer printhead life by avoiding contamination
- Fewer unplanned production-line stoppages
- Full compatibility with the original machine standard
Ordering & Compatibility
A genuine-spec Ink System PCB (Part No. 25115) is built for Domino A Series CIJ Printers. Always match the exact part number to your machine model. As a factory-direct manufacturer with 20+ years in CIJ inkjet coding, we supply original-spec compatible parts with strict QC and worldwide shipping. Send us your part number and quantity for a written quotation within 2 working hours.
