Holster STD Head Cover
- No. Bahagian
- 36731
- Sesuai untuk
- Domino A Series / GP / A100 / A200 / A300 / E50 / A100+ / A200+
- Keadaan
- Baharu serasi OEM
- Kuantiti min.
- 1 pc
- Masa kirim
- 7-15 working days
- Harga
- US$34.31
- Jaminan
- 12 months
Butiran Produk Penutup kepala cetak standard (holster STD) 36731 digunakan untuk pencetak continuous inkjet (CIJ) Domino siri A, GP, A100, A200, A300, E50, A100+ dan A200+. Direka untuk bahagian penutup pelindung kepala cetak dan sesuai untuk penggantian penutup kepala cetak, penyelenggaraan penutup standard holster serta kerja pembaikan perlindungan kepala cetak. Produk ini dibekalkan sebagai penutup holster standard (STD). Pelanggan perlu mengesahkan sama ada model pencetak sedia ada dan konfigurasi penutup kepala cetak serasi sebelum membuat pesanan. Sokongan Perkhidmatan Kami bukan sahaja membekalkan alat ganti pencetak yang boleh dipercayai, malah menawarkan sokongan teknikal untuk semakan model, panduan pemasangan dan penyelesaian masalah. Pasukan kami boleh membantu pelanggan mengesahkan keserasian dan memilih alat ganti yang sesuai mengikut model pencetak serta keperluan penyelenggaraan. Nota Pembelian Sila sahkan model pencetak (A series / GP / A100 / A200 / A300 / E50 / A100+ / A200+), nombor alat ganti (36731), versi penutup holster STD dan keserasian kepala cetak sebelum membuat pesanan.
Maklumat Perdagangan
- Masa Penghantaran7-15 working days
- Waranti12 months
- Terma PerdaganganFOB Guangzhou (Incoterms 2020) · FCA · EXW Meizhou available
- Syarat PembayaranT/T 30% deposit, 70% before shipment
- PenghantaranDoor-to-door express (DHL/UPS) available for sample orders
- Keupayaan Bekalan200 sets per month
Spesifikasi Teknikal
| Part No | 36731 |
|---|---|
| Suitable For | Domino A Series / GP / A100 / A200 / A300 / E50 / A100+ / A200+ |
Soalan Lazim
Model pencetak apa yang sesuai untuk 36731?
Adakah ini bahagian asli atau pengganti serasi?
Berapa masa kirim dan bagaimana penghantaran?
Adakah anda juga membekalkan dakwat, pelarut dan penapis bersama alat ganti?
Technical Guide
What is the Holster STD Head Cover
This Holster STD Head Cover (Part No. 36731) is a core part of the printhead assembly in Domino A Series / GP / A100 / A200 / A300 / E50 / A100+ / A200+, responsible for generating, charging and deflecting ink droplets.
Key Functions
- Generates and charges individual ink droplets
- Deflects droplets into the gutter or onto the product
- Guides the jet for accurate character placement
- Sustains stable high-speed printing quality
Common Failure Symptoms
- Unexpected 'Viscosity' / 'Ink Viscosity' or print-quality alarms
- Faint, broken or drifting printed characters
- Recurring nozzle or charge-electrode blockages
- Higher solvent or ink consumption than normal
- Sudden print stop caused by system errors
Replacement & Installation Steps
- Power down the printer and disconnect it from mains
- Relieve pressure and drain the related ink line
- Remove the worn part and inspect for debris or damage
- Install the new part with correct orientation and torque
- Reconnect, prime / bleed the circuit and run a test print
Troubleshooting Guide
- Check ink and solvent reservoirs are filled to range
- Inspect for leaks along ink and solvent paths
- Clean the part with the recommended solvent if accessible
- Confirm electrical connectors and tubing are seated
- Replace the part if the error persists after calibration
Benefits of Original-Spec Parts
- Stable print quality under all operating conditions
- Lower ink and solvent waste through correct specification
- Longer printhead life by avoiding contamination
- Fewer unplanned production-line stoppages
- Full compatibility with the original machine standard
Ordering & Compatibility
A genuine-spec Holster STD Head Cover (Part No. 36731) is built for Domino A Series / GP / A100 / A200 / A300 / E50 / A100+ / A200+. Always match the exact part number to your machine model. As a factory-direct manufacturer with 20+ years in CIJ inkjet coding, we supply original-spec compatible parts with strict QC and worldwide shipping. Send us your part number and quantity for a written quotation within 2 working hours.